Attitude Industries GEN 3 Fuel Controller Skidoo Polaris Arctic Cat

Description

Attitude Industries GEN 3 Fuel Controller Skidoo Polaris Arctic Cat
This fuel controller can be used for a ton of applications....twin cylinder engines that run 1 injector per side.
USES LOAD BASED TECHNOLOGY WHICH IS SUPERIOR TO ALPHN-N TUNING (TPS vs RPM)
ABILITY TO MODIFY FUEL WITHOUT ALTERING THE STOCK FUEL MAP
CARBERATOR TUNING LOGIC - CRUISE, ACCELERATION, FULL THROTTLE ZONES
EASY TO SEE LED LIGHTS TO INDICATE OPERATING ZONE
PUSH BUTTON INTERFACE TO ALLOW QUICK FINE TUNING
NO COMPUTER OR DYNO REQUIRED
EASY INSTALLATION
:
THE GEN 3 CONTROLLER ADDS FUEL BY OFFSETTING THE PULSE WIDTH A GIVEN FIXED VALUE.
EX: you can add 1 ms of pulse width
This Attitude Box is capable of handling the fuel needs for your vehicle from stock, to pipes
and air intakes, and beyond. This is an Electronic Jet Kit. Like jet kits in the past the more
you modify the more responsibility you take in getting your fuel curve right.
Product Features:
 Plug and Play Installation – Minutes to install. Stage 1 base settings are preset.
 NO Computer Needed, NO Dyno Required – Make adjustments on the vehicle with
the engine running.
 Simple Push Button Adjustment Interface
 Water-Resistant
DO NOT TURN ALL THE SETTINGS UP TO 8. The higher the setting DOES NOT mean more
power. You are making fuel adjustments where the proper fuel tuning will achieve the
best power and torque.
TUNING INSTRUCTIONS
The controller can be adjusted “on the fly” to tune your vehicle. No computer or other external device is needed to
make tuning adjustments. All that is required is for your vehicle to be running which provides power to the controller.
Most controllers come pre-programmed to the recommended base light settings which represents a typical stage 1
(intake + exhaust) vehicle modification. It is recommended to install the controller and take a test ride first before
making any mode adjustments.
Six modes are available to make adjustments. You enter the adjustment mode by pressing the MODE button. Correctly
entering the adjustment mode will display flashing LEDs on the LED display. Pressing the MODE button repetitively will
move you through all the modes. Note: The MODE button is sensitive and will at times skip a mode. Pressing the
MODE button at the last mode will bring you back to the first mode. To exit the adjustment mode and return to
operation mode you just wait several seconds until the LED display reverts back to solid LED colors.
The six modes available are distinguished by an LED color combination. The six modes in respective order are as follows:
Green, Yellow, Red, Green-Blue, Yellow-Blue, and Red-Blue. All six modes have 15 possible light settings. The settings are
adjusted by pressing the PLUS (+) and MINUS (-) buttons. For easy reference the LEDs are numbered 1 through 8. Half
step settings are represented by two same color LEDs flashing (ex: 4.5 has 4th and 5th LEDs lit). The 0.5 setting is
represented by the 1st LED blinking at a much faster rate. Modes 4, 5, and 6 are distinguished by the 8th LED also
blinking blue.
Every mode represents an adjustable feature within your vehicle’s drive cycle. Reference the Example Drive Cycle
diagram to gain a visual understanding. Each mode can be defined as either a FUELING mode or a SWITCH POINT mode
as follows:
FUELING MODES - Modify the fuel amount compared to the stock fuel when the corresponding zone is active. The higher
the light setting the MORE fuel is being added. The lower the light setting the closer you are to running STOCK fuel levels.
Light settings for GEN 3.5 controllers can be SUBTRACTING fuel from the STOCK fuel level.
Note: The controller can be set to stock fueling without uninstalling the unit.
GEN 3 / GEN 3.2 controllers – Set ALL FUELING modes to a light setting of 0.5 to revert back to stock.
GEN 3.5 controllers – Stock FUEL settings vary according to application. Check website for info.
SWITCH POINT MODES – Determine the transition point between two corresponding zones. The higher the light setting the
longer it takes for a zone to engage. The lower the light setting the faster a zone will engage. Note: Switch point modes do
not have to be adjusted that frequently.
Mode 1 – GREEN – CRUISE FUEL
Represents fuel modification under CRUISE conditions. When the LED display shows solid GREEN lights then the GREEN
zone is active and fuel is modified by this mode. Mode has the largest affect on fuel mileage.
Mode 2 – YELLOW – ACCELERATION FUEL
Represents fuel modification under ACCELERATION conditions. When the LED display shows solid YELLOW lights then
the YELLOW zone is active and fuel is modified by this mode.
Mode 3 – RED – FULL THROTTLE FUEL
Represents fuel modification under FULL THROTTLE conditions. When the LED display shows solid RED lights then the
RED zone is active and fuel is modified by this mode. Mode has the largest affect on tuning for the vehicle’s top
horsepower value.
Mode 4 – GREEN-BLUE – IDLE SWITCH POINT
Represents transition between STOCK FUELING and the GREEN zone. Light settings correspond to RPM values. The 1st
LED will very slowly blink GREEN when no zone is engaged.
Mode 5 – YELLOW-BLUE MODE – ACCELERATION SWITCH POINT
Represents transition between GREEN and YELLOW zones which relates to cruising and accelerating conditions. The
YELLOW zone is load based and engages differently between gears and riding conditions.
Mode 6 – RED-BLUE MODE – FULL THROTTLE SWITCH POINT
Represents transition between YELLOW and RED zones which relates to accelerating and full throttle conditions. The
RED zone is load based and engages differently between gears and riding conditions.
On "Best Offer" listings, please don't make ridiculous offers. It's rude and a waste of everyone's time....you won't receive a counter offer.
Payment is required within 72 hours of purchase, unless you've contacted me to make arrangements.
I live in the mountains and can only ship out Monday through Friday. I try and fulfill orders right away, and often ship out same business day. Please contact me if something doesn't seem right on the ebay shipping quotes. All shipping in the lower 48 states is free. I will ship anywhere in the world, so let me know if you're an international buyer having problems with a purchase....I can modify listings to accomodate different shipping methods.
There are certain international locations that I can not ship large items to, such as motors and tracks. I'm sorry ahead of time if an international order has to be canceled due to shipping issues.
Twisted Tunnel does not offer returns on purchases. That being said....if an order is screwed up, I will make it right. I strive to get people back on the snow as soon as possible. I do make mistakes sometimes, so please let me know if I've misrepresented an item in some way and I'll take care of it. IF THERE IS NOT A MISTAKE ON MY END, AND I STILL AGREE TO A RETURN.....THE BUYER IS OBVIOUSLY RESPONSIBLE FOR THE RETURN SHIPPING, AND WILL RECEIVE A REFUND FOR THE PURCHASE MINUS MY ORIGINAL COST TO SHIP IT OUT.
Twisted Tunnel specializes in parting out all makes and models of snowmobiles. I have an ever-increasing inventory of used parts from Polaris, Yamaha, Ski-Doo and Arctic Cat Sleds. If you don't see a part listed, let me know you're looking and I'll do my best to help you find it.
Please feel free to message me with any questions!
Pictures sell!
Auctiva offers Free Image Hosting and Editing.
300+
Listing Templates!
Auctiva gets you noticed!
The complete eBay Selling Solution.
Track Page Views With
Auctiva's FREE Counter